download
Begin by removing the front skid plate located on the front of the ATV. Remove the four side 8mm bolts and four bottom 6mm bolts securing the front skid plate, figure 1. Save the fasteners as they will be used later to reinstall the front skid plate. 2. Remove the four plastic rivets on each side of the front plastic fascia, figure 2. Use a large screw driver to carefully remove the center rivet. After removing the center rivet, remove the rivet housing. Save the fasteners as they will be used to reinstall the front plastic fascia. 3. Remove the two 6mm bolts that attach the front plastic fascia to the bumper, figure 3. Remove the front plastic fascia at this time . Remove the two 6mm bolts that attach the front bumper to the plastic headlight assembly, figure 4. Save the fasteners as they will be used to reinstall the front bumper. 5. Remove the two top 8mm bumper bolts that attach the front bumper to the front rack, figure 5. Save the fasteners as they will be used to reinstall the front bumper. Figure 5 Remove Top Bumper Bolts Remove (both sides) 6. Remove the two ottom bumper bolts that attach the bumper to the bottom of the vehicle frame, figure 6. Save the fasteners as they will be used to reinstall the front bumper
Incoming search terms:
- 2002 honda rubicon service manual
- 2002 honda rubicon coolant flush
- honda rubicon high altitude carb adjustment
- 2005 honda rubicon 500 carburetor
- 2007 honda foreman headlights wont work
- honda foreman lights not working
- foreman 500 rocker arm removal
- honda trx 500 rubicon 4x4 atv carb diagram
- wireing diagram to install a warn winch on a 2015 honda rubicon
- how to change the coolant in 2005 honda trx500fa atv
